Luminous advertising: a bright problem
In the early hours in Santo Domingo, while the city sleeps, some bedrooms are flooded with a relentless artificial light that comes neither from street lamps nor from the moon, but from an LED billboard hundreds of meters away. This scene is not fiction. It is a real manifestation of a problem…

In the early hours in Santo Domingo, while the city sleeps, some bedrooms are flooded with a relentless artificial light that comes neither from the street lamps nor from the moon, but from an LED billboard hundreds of meters away. This scene is not fiction.
It is a real manifestation of an increasingly evident urban problem: light pollution caused by outdoor advertising with no clear regulatory limits.
Little by little, the center of the capital has lost the chance to see the night sky.
The legal vacuum around “advertising lumens”
Currently, the Dominican Republic has no specific national regulation setting quantitative limits on the brightness of billboards, LED screens or illuminated signs. This gap leaves citizens unprotected against sources of excessive light that, as in the case described, enter homes during rest hours and affect sleep quality and well-being.
The regulations that exist today are based mainly on administrative permits granted by bodies such as INTRANT (the National Institute of Traffic and Land Transport) and the municipal councils, which assess aspects such as the size, location and structural safety of the billboards.
As part of the problem, no technical limits are set on luminance (nits or candelas/m²), in contrast with countries that do regulate these values to prevent glare and harm to the urban and natural environment.
Environmental and urban impact of unregulated light
The Ministry of Environment has the authority to intervene if it considers that a lighting installation affects ecosystems or produces significant light pollution, especially in areas near protected areas. However, this intervention is reactive and case by case, since there is no mandatory compliance standard that makes it possible to determine objectively when a billboard is “too bright”.
The absence of technical regulation has led companies to install screens with excessive brightness levels, even at night. This phenomenon contributes to the increased brightness of the night sky —a clear indicator of light pollution— and affects not only urban residents but also nocturnal species whose orientation depends on natural light cycles.
Consequences for road safety and public health
Beyond the environmental impact, excess lighting can have direct implications for road safety. INTRANT is empowered to order an advertising screen switched off or modified if its brightness poses a risk of distraction or glare for drivers. However, this power is exercised under ad hoc technical criteria rather than on standardized, verifiable luminance values.
From a public health perspective, prolonged exposure to intense artificial light at night can disrupt people's circadian rhythm, increasing the risk of sleep disorders, fatigue and other physiological problems. In residential areas, a poorly placed screen can become a constant source of light intrusion, with no clear mechanisms for citizens to file a complaint.
International references as informal guidance
In the absence of local regulation, some companies follow international standards, such as those of the IESNA (Illuminating Engineering Society of North America) and the CIE (International Commission on Illumination), which recommend keeping the luminance of digital screens below 250-300 nits at night. They also suggest that backlit billboards should not exceed 500-600 lux.
These values allow effective visibility without causing nuisance. In addition, international good practices include the use of ambient light sensors and automatic brightness adjustment, which reduce visual impact during nighttime hours. Unfortunately, in the Dominican Republic these practices are neither mandatory nor enforced, which leaves their implementation to the discretion of each advertiser.
Institutional fragmentation and the need for regulatory coordination
In practice, the regulation of illuminated advertising in the country falls to a fragmented institutional framework:
- INTRANT regulates placement in road zones and may intervene for safety reasons.
- Municipal councils control permits, fees and the structural characteristics of billboards.
- The Ministry of Environment may act in cases of environmental impact.
However, none of these bodies has concrete regulatory tools to measure, compare or penalize excess luminance, beyond what their administrative criteria establish. The lack of a unified technical legal framework creates uncertainty for authorities, citizens and businesses alike.
Toward modern, well-lit legislation
The growth of digital advertising infrastructure in urban areas makes a regulatory review urgent, one that takes into account technical criteria for luminance and light pollution. A future “outdoor lighting law” could include maximum luminance standards, permitted time slots, and limits by zone (residential, commercial, natural) and technological requirements such as dimming sensors.
It would also be desirable to bring INDOCAL and the Superintendencia de Electricidad (SIE) into the design of these rules, drawing on previous experience such as Resolution 050-2019 on public street lighting and on references from NORDOM 655 and ISO 8995-1, so that the regulation is technically sound and applicable across the country.
A Bright Future
The light from a billboard should not invade homes or become an environmental or traffic hazard. Illuminated advertising is legitimate and necessary in modern cities, but its use must be regulated under principles of social, technical and environmental responsibility.
In the Dominican Republic, the regulatory vacuum on advertising brightness is a challenge that needs urgent attention if we want to build a more livable and sustainable urban environment for everyone.